2 Part Epoxy for Caulking Gun - Injection mortar - FIS EM 390 S

Approved for:

▪ Cracked and non-cracked concrete C20/25 up to C50/60
▪ Reinforcement bars

For fixing of:
▪ Spigot Tactiles
▪ Steel constructions
▪ Consoles
▪ Machines
▪ Staircases
▪ High-racks
▪ Wooden constructions
▪ Reinforcement bars

WHERE TO USE
Interior and exterior bonding of flooring in rubber, PVC, textiles, needlepunch, linoleum, polystyrene and polyurethane panels, fibrous cement, wood, sheet metal, plastic laminates.

▪ Best performance mortar in the shuttle cartridge based on epoxy resin.
▪ Optimum Solution for concrete (anchor rods and reinforcement bars).
▪ Resin and hardener are stored in two separate chambers and are not mixed and activated until pushed through the static mixer.
▪ Partially used cartridges can easily be reused by changing the static mixer.
Advantages/Benefits
▪ Very good bonding of the mortar ensures highest loads in concrete.
▪ Suitable for underwater installations.
▪ Suitable for diamond drilled holes.
▪ Expansion-free anchoring allows low spacings and edge distances.
▪ Ergonomic application guns for quick and easy installation.

Typical applications:
Is used for bonding:
Spigot Tactiles, Thin rubber flooring. Semiflexible homogeneous or composition PVC flooring. Exterior textile and needle punch
flooring. Rubber-Flooring-Adhesives

TECHNICAL CHARACTERISTICS is a low viscosity two component adhesive consisting of a polyurethane polymer, part A, and a special hardener, part B. By accurately mixing the two components together a uniformly coloured paste is obtained, that can easily be applied via the special caulking gun. Best applied on horizontal surfaces.

As part of the Disability Discrimination Act, and to meet Building Codes of Australia requirements, itis now mandatory to provide Tactile Warning Indicators to stairs, ramps and many other changing conditions. These Tactile Indicators have a raised profile to alert visually impaired individuals of an up coming hazard, or provide them with guidance for safe passage. The Tactiles are available in two types: round ridge patterns for warning of hazards; or a long, straight ridge pattern for directional guidance. The adhesive is a strong, 2-Part mixture that is suitable for both indoor and outdoor use. No need to recess rubber indicators adhere directly to the surface.