Home > Shop by Safety Gear > Safety Miscellaneous > Reflective Tapes >

3M Reflective Hazard Stripe Tapes Class 1

3M Reflective Tapes


 
Alternative Views:


Starting From: $287.93 Inc GST
SALE FOR ONLINE ORDERS ONLY! PRICES FROM: $233.08 Inc GST
You save $54.84!



Availability: Usually Ships in 1 to 2 Business Days
Product Code: TAPE-REFC1HS45

Colour?

Colour*:
Black/Yellow
Red/White
Yellow/Red
Left or Right?

L/R*:
\\\\ Left Hand Stripes \\\\
//// Right Hand Stripes ////
Choose the width you require

Width?*:
25mm Class 1 Hazard Stripe
50mm Class 1 Hazard Stripe [Add $112.00]
75mm Class 1 Hazard Stripe [Add $187.00]
100mm Class 1 Hazard Stripe [Add $252.00]

Qty:
Product Details Extended Information
 
3M Brand - 45.7m. Roll Reflective Hazard Stripe Tapes Class 1 - Choose the width & colour required
Quality Pressure Sensitive Adhesive Hazard Stripe Reflective Marking Tape is used to highlight possible hazards which could impact on worker safety.

The tape shown in this image above is class 1 reflective.
Watch a short video for more information about these reflective tapes
Features

Unlike general hazard stripe tapes which are non reflective Advanced Group's Hazard Stripe Reflective Marking Tape provides day/night protection, reflective colour during the night and hi viz during the day. These Products are regularly used with

  • Tradesmen’s tool boxes and equipment which are used on site,
  • Scaffolds, ladders, pallet jacks, barrows
  • Dump bins
  • Shipping containers,
  • Bollards, barriers, warehousing structures and racking,
  • Motor vehicles, fork lifts and allied transport,
  • Traffic hazard points, inside and outside a warehouse or building.

This Product’s specific benefit is highlighting and identifying any item or possible hazard which could potentially cause an accident. The pressure sensitive form of our tape allows simple application by tradesmen or handypersons. Difficult or more involved applications may require a professional installer.

Note: This tape is suitable for application to clean flat Metal (colorbond steel) substrates. It may also be applied to other surfaces but technical advice should be sought prior to application.

Advanced Group's Hazard Stripe Reflective Marking Tape is available in three qualities

Class 2, Engineer Grade, for general purpose highlighting. Available in

  • Standard length rolls, 45.7 metres
  • Standard widths, 25mm, 50mm, 75mm, 100mm
  • Available in colour combinations White/Red, White/Blue, Red/Yellow, Black/Yellow, White/Green, White/Orange
  • Customised length and width rolls can be supplied.

Class 1 Grade, where a greater level of reflectivity is required. Available in

  • Standard length rolls, 45.7 metres
  • Standard widths 25mm, 50 mm, 75mm, 100mm
  • Colour combinations are white/red, yellowithblack, yellowithred
  • Special lengths and widths can be supplied to meet special needs

Class 1W, Diamond Grade, provides a superior reflectivity where the utmost visual effectiveness is require, day and night. Available in

  • Standard length rolls, 45.7 metres
  • Standard widths, 25mm, 50mm, 75mm, 100mm
  • Colour combinations are fluoro red orange/black, fluoro lime yellow with black
  • also available in non standard lengths and widths to meet special requirements.


Browse for more products in the same category as this item:

Shop by Safety Gear > Safety Miscellaneous > Reflective Tapes
Shop by Safety Gear > Worksite Safety
Shop by Safety Gear > Safety Miscellaneous > Reflective Sheeting
3m reflective tape
Shop by Safety Gear > Safety Miscellaneous
Shop by Safety Gear