 |
 |
 |
 |
|
 |
|
Features
- High shock resistance,energy saving, environment friendly.
- Automatically starts to work when night falls or with the onset of inclement weather.
- These aluminum alloy LED road studs are naturally charged by the sun.
- The LED lights come on automatically as soon as it starts getting dark every night.
- Cost effective, easy to install and require absolutely no wires or maintenance.
- Dramatically enhances the look of your garden / yard / driveway.
- Specifically designed with road safety in mind and can help to prevent serious accidents and emit rather than reflect light.
- Can operate for more than 24 hours off only a few hours of charge from sunlight
Specification:
- Material: Auminum Alloy
- Bearable Weight: 20ton
- LED Brightness: 4200-5000mcd
- Solar Panel Power: 0.2W/2.5V
- Battery Capacity: 600mah/1.2V
- Mounting Hole Diameter: 6.5mm / 0.26in
- Mounting Hole Distance: 90mm / 3.54in
- Total Size: 104mm x 103mm x 22mm / 4.09in x 4.06in x 0.87in (L*W*T)
Package Content:
- 1 x LED Solar Road Stud Light
To install cats eyes using thermal adhesive pads:
- Make sure that the area is clean, dry and free from oil and/or debris.
- Apply heat from your blowtorch for 15 seconds to warm up the bitumen / asphalt or concrete.
- Place the pad on the surface and continue to apply heat to the pad and surrounding area for another 15 seconds until the bubbles on the pad start to form and pop.
- As soon as the bubbles start popping; lay the cats eye on the pad and apply pressure until the tar starts to ooze from the edges. Curing time will vary from location to location depending on ambient temperatures.
You'll Need: 1 x Broom to sweep area and 1 x blow torch
Adhesive Strength: 5 MPA
Curing time: Varies but roughly 60 seconds
|
|
|
|
|
|
| Related Road Signs / Traffic Management / Safety Products |
|
|
|
|
