 |
 |
 |
|
Self Tapping Concrete Bolt FBS 12x150N
Use these bolts to fix your wheel stops onto concrete.
Drill a hole with a rotary hammer drill to 12mm dimaeter by about 200mm deep (to allow dust to fall back in the hole) then use an impact wrench or a rattle gun to fix the bolt down.
Watch a short video for more information about these fixings
Advanced Group is mainly located in Keysborough (in South-East Melbourne, Victoria) however we ship all over Australia / Free in store pick up.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Suitable for- The concrete screw is mounted very quickly with the help of an impact wrench (use a suitable cap), which results in considerable time savings
- common fixings.
- When the concrete screw is screwed in, the teeth will cut into the concrete borehole wall.
- The concrete screw is correctly mounted if the head fits well to the attachment, the visual inspection is sufficient.
- Borehole cleaning is no longer required for vertical installation. When fitting in the floor, the borehole must be drilled 2 times the depth.
- When using hollow drills, manual borehole cleaning is completely dispensed with.
Benefits- The extra short Concrete screw with reduced anchorage depth is the fast, economical choice for a very wide range of applications.
- Approved for multiple fastenings of non-load-bearing systems in hollow-core slabs, cracked and uncracked concrete, making it ideal for mounting piping, suspended ceilings, etc.
- The self-tapping concrete screw allows complete disassembly and is very suitable for temporary fixings.
- With three different anchoring depths, different concrete thickness can be fitted with one size of Concrete Screw.
- The seismic approvals C1 and C2 guarantee that the highest safety requirements are met.
- Approved for reuse in both torn and uncracked concrete, using the control sleeve.
|
|
|
|
|
|
|