Installation Kit, NON-SPIGOT stud - Stainless Steel Indicator Studs -
Quantity: 1
Brady Page no. 351
Plain-Backed Installation Kit comes with – template, cleaning agent, abrasive pad, adhesive, adhesive applicator gun, installation instructions. For additional adhesive see price table.
Note: Adhesive in kits will cover a 600 x 900mm area at the top and bottom of a hazard.Additional adhesive for spigotted studs will do approximately 300 studs, additional adhesive for non-spigotted studs will do approximately 120 studs. With a depth of 600mm, 240 studs cover1 lineal metre.
As part of The Disability Discrimination Act compliance, it is now mandatory to provide TactileWarning Indicators to stairs, ramps and many other changing conditions. Stainless Steel Studs (316)now available in Four styles: Stainless Steel (with and without spigot), and Grit (Carborundum)-Filled, (with and without spigot). The Grit-Filled option is available in two colours: Yellow and Black.These are ideal for metallic surfaces to achieve 60% luminance requirements under AS/NZS 1428.All styles have achieved a R13 Slip Rating which is the highest available under AS/NZS 4586.Studs are 35mm in diameter, 5mm protrusion height. Spigot measures 15x6mm.N.B: You will need 216 individual studs to cover a 600x900mm area, which is generally the minimum requirementfor a single hazard (but you need two of these to cover the top and bottom of the hazard).
Industrial Labelling and Safety Solution Product from Advanced Group
Advanced Group is mainly located in Keysborough (in South-East Melbourne, Victoria) however we ship all over Australia / Free in store pick up.
|
